Access MediQuip
We had some fun with this one. The letters and
graphics are all 1/2"-thick XPVC, painted and stud-
mounted to the back panel. The larger letters were
spaced off 1/4". Since the logo had so many thin
lines that came to sharp points, we inlaid them into
the panel about 1/8" deep. This made them much
more stable and secure. The panel itself was the fun
part. We did a Faux Finish using three colors of
Matthews paint, daubing some on with a rag. Then
we sanded down through the top colors and finished
it off with a satin clear. It really worked well!
This sign was produced for:
Sign Consultants
Orange City, Florida
Marjorie Baty 386-775-3541